Windows 7/8 / 8.1 / 10 – Xerox Smart Start program (download the required driver automatically)
Size: 28 MB
Bit depth: 32/64
Link: Xerox WorkCentre 6515
Windows 7/8 / 8.1 / 10 – PCL6 (for printer)
Size: 15 MB (x32) / 18 MB (x64)
Bit depth: 32/64
Links:
Windows 7/8 / 8.1 / 10 – PostScript (for printer)
Size: 15 MB (x32) / 18 MB (x64)
Bit depth: 32/64
Links:
Windows 7/8 / 8.1 / 10 – driver for scanning
Size: 15 MB
Bit depth: 32/64
Link: Xerox WorkCentre 6515
Driver Installation in Windows 10
To start working with the Xerox WorkCentre 6515 MFP, you need to install the software on the computer to which it will be connected. This work is not difficult, but obligatory. For this model, you will need to separately install the distribution kit for the printer and for the scanner. This instruction will show you how to complete the second part (scanner). First you need to download the driver for the Xerox WorkCentre 6515. The link for this is on this page above. You can use the utility from the disc that comes with the device in the kit. But if the driver was written a long time ago, it will have to be updated immediately.
The next step is to run the driver by double clicking on it. You will see the first window, in it click “Next”.
Confirm that you agree to the license agreement by checking the box next to the phrase “I accept the terms …”. Click Next.
Click “Install”.
The installation will start, it may take a couple of minutes. Its duration will depend on the power of your computer. When the installation is finished, a new window will appear. Click “Finish” in it.
It remains for you to check that the device is ready for use. If you cannot print or scan, restart your computer.